The Compucon 2U8 Atom Twin is based on the dual-core Intel Atom D525 1.8 GHz. Each node also
supports 4 GB of non-ECC DDR3-800 SO-DIMMs, dual Gigabit Ethernet LAN, 2
USB ports, IPMI 2.0 with virtual media over LAN support, and 3x 2.5”
SATA hot-swap HDDs.
Compucon extends its lead in the 2U4 Platinum Server formerly known as 2U Twin with 2U8 Atom Twin hat includes eight hot-pluggable Intel® Atom™ Dual-Core processor nodes
in a 2U form factor (two nodes per single hot-swap unit). Each node
also supports 4 GB of non-ECC DDR3-800 MHz SO-DIMM, dual Gigabit
Ethernet LAN, 2 USB ports, IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support, and 3x 2.5" SATA hot-swap HDDs. The system also
includes (1+1) redundant 720W Gold Level power supplies with PMBus, and
four heavy-duty fans with optimized fan speed controls.
The 2U8 Atom eight-node system is optimized for high-density and low-power environments such as cost-effective data centers, industrial process control, small offices, web proxy servers or cache servers.
The 2U8 Atom Twin is a unique server system. With eight system boards incorporated into a single chassis acting as eight separate nodes, there are several points you should keep in mind.
- Optimized HPC and Datacenter Rackmount Server Solutions
- Up to 6 hot-pluggable 3.5" HDDs per 1U node (12x 3.5" HDDs total)
- Hot-pluggable, cable-less Xeon® DP nodes (2U Twin2™ and 2U Twin)
- Up to 192 GB of Reg. ECC DDR3 memory in 12 DIMMs
- QDR or DDR InfiniBand connectivity options
- Redundant Gold Level power supplies
- High-efficiency serverboard VRMs (90%+) and cooling subsystem designs
- Onboard IPMI 2.0 + KVM with dedicated LAN
Nodes - Each of the serverboards act as a separate node in the system. With two nodes housed in each of four hot-swap trays, two may be powered off and on without affecting the others. In addition, each tray with its two nodes is a hot-swappable unit that may be removed from the rear of the chassis. The nodes are connected to the server backplane by means of an adapter card.
System Power - The server has an additional 720W power supply module (two total) for power redundancy. If a power supply module fails the other backup module will keep the system running until it can be replaced.
for further information and pricing by stating your operational
background and requirements for high-density servers. We will get back to you
SATA Backplane/Drives - As a system, the 2015TA-HTRF supports the use of 24 SATA drives. A single backplane works to apply system-based control for power and fan speed functions, yet at the same time logically connects a set of three drives to each serverboard. Consequently, RAID setup is limited to a three-drive scheme (RAID cannot be spread across all 24 drives).