Menu Content/Inhalt
Home arrow Knowledge Base arrow Other Products arrow M/BOARD Intel 3210 FOR 5015B-MT

M/BOARD Intel 3210 FOR 5015B-MT Print
April 2011
Key FeaturesS5.jpg
1. Intel Xeon 3000 Sequence and
    Core 2 Quad / Duo Series in LGA775
    Package (FSB 1333/1066/800 MHz)
2. Intel 3210 + ICH9R Chipset
3. Up to 8GB unbuffered ECC / non-ECC
    DDR2 800/677 SDRAM
4. Intel 82573V + Intel® 82573L
    PCI-E Gigabit Controllers
5. Built-in SATA ICH9R Controller
    6x SATA (3 Gbps) Drive with
    RAID 0, 1, 5, 10 Support
6. Universal Riser Slot:
    1 PCI-E x8 or 1 PCI-X slot
    (requires riser card)
7. On board ATI ES1000 32MB Graphics
8. IPMI 2.0 (Virtual Media Over LAN or
    Optional KVM Over LAN)

Specifications
Physical Stats
Form Factor
  • ATX
    		•
    Dimensions
  • 12" x 9.6 ", (30.48cm x 24.38 cm)
    		•
     
    Processor/Cache
    CPU
    • Single LGA775 ZIF Socket
    • Supports Quad-Core Intel® Xeon® X3300/X3200 series
    • Supports Dual-Core Intel® Xeon® E3100/3000 series
    • Supports Intel® Xeon® processor L3360 and L3110 series
    • Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
    • Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
    • Supports Intel® Pentium® E5000/E2000 series
    • Supports Intel® Celeron® E1000 and 400 series
    • NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
    System Bus
    • 1333 / 1066 / 800 MHz system bus
     
    System Memory
    Memory Capacity
    • Four 240-pin DIMM sockets
    • Supports up to 8 GB of memory (Dual Channel)
    Memory Type
    • DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1 GB, 2GB, 4GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    Chipset
    • Intel 3210 chipset
    • ICH9R + PXH + Intel® 82573V + Intel® 82573L
    Serial ATA
    • Intel® ICH9R SATA2 (3 Gbps) controller built-in
    • RAID 0, 1, 5, 10 support (Windows Only)
    • RAID 0, 1, 10 support (Linux)
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
    • SIMSO Slot - Intelligement Management
    Network Controllers
    • 2x Single-port Gigabit PCI-Express Ethernet Controllers
    • Intel® 82573V + Intel® 82573L
    • Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
    VGA
    • On-board ATI ES1000 (32MB) graphics
    Super I/O
    • Winbond 83627HG chip
    Clock Generator
    • CK505
     
    Input / Output
    Serial ATA
    • Six Serial ATA ports (3 Gbps performance)
    • Six SATA hard drives supported
    IDE
    • One EIDE channel supports up to two UDMA IDE devices
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    USB
    • Up to 8x USB 2.0 / 1.1 compliant ports
    • 2 rear ports
    • 2 internal headers + 2 on-board
    VGA
    • 1x VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1x Fast UART 16550 serial port
    • 1x internal header
    Parallel Port
    • 1x ECP / EEP Parallel Header
     
     
       
       
       
     
    Expansion Slots
    PCI-Express
    • 1 Universal (x8) PCI-e slot
    PCI-X
    • 1 64 bit PCI-X 133 Mhz slot
    PCI
    • 1 32 bit PCI slot
     
    System BIOS
    BIOS Type
    • 16Mb Flash EEPROM with Phoenix BIOS®
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3 support
    • PCI 2.2
    • ACPI 1.0/2.0
    • SMBIOS 2.3
    • USB Keyboard support
     
    Management
    Software
    • Optional IPMI 1.5/2.0
    • Watch Dog
    • NMI
    • W83793G Rev G
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Keyboard Wakeup from Soft-Off
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
    • Suspend to RAM(STR)
     
    PC Health Monitoring
    CPU
    • Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
    • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
    • Adjustable CPU clock frequency ratio (Only available if CPU is supported)
    FAN
    • Total of six 4-pin fan headers
    • 6x fans with tachometer monitoring
    • Status monitor with firmware / software speed control
    • Status monitor for on/off control
    • Support 3-pin fans (without speed control)
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connector
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip support
    • Thermal Monitor (TM2) Support
    • PECI
    LED
    • CPU / System Overheat LED
    • +5 Standby alert LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
     
    Operating Environment / Compliance
       
    Environmental Spec.
    • Operating Temperature: 10°to 35°C (50°to 95°F)
    • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)


    Click here to return
    SX7SBI