|
May 2011 |
| Motherboard Model: |
#1AP7H55M Asus P7H55-M
|
| Motherboard BIOS version: |
1302
|
| Document Date: |
24 May 2011
|
| Download: |
BIOS Files (Zip Format)
|
Required Files
- A flash utility, this motherboard has an AMI BIOS and the
utility used is the AMI Firmware Update Utility. It will either be named
AFUDOS.exe or BUPDATER.exe.
- The ROM image used by the flash utility for flashing the
BIOS chip. For Asus motherboards the filename will end with 4 digits
representing the BIOS version and then the .rom extension.
Procedure 1A - Flashing the BIOS
- Create a bootable DOS-formatted USB drive.
- Copy or extract the 2 required files onto the USB drive.
- Boot the computer from the USB drive, to bring up the Boot Menu for Asus boards press F8 when prompted.
- Make sure you are in the folder containing both the application and
the ROM image, then use one of the following commands depending on the
name of the flash utility: bupdater /i1234.rom or afudos /i1234.rom, replacing 1234 with the rom file name.
- Once the programming is complete you can restart the computer.
- The
first reboot will result in the following message: "Please Enter Setup
to recover BIOS Setting, CMOS Date/Time Not Set ". Press F1 and follow Procedure 2 (Step 2) below.
Procedure 1B - Alternative method to Flash the BIOS
- Copy a valid ROM image to a USB drive and plug it into the computer, the flash utility isn't necessary.
- Press the [Delete] key during the POST screen to enter the BIOS setup.
- Go to the 'Tools' menu and then select 'Asus EZ Flash 2'
- Navigate to the ROM image and select it; the utility will confirm
that it is valid and ask if you want to go ahead with flashing the BIOS.
- Confirm that you do, then once it is finished flashing the BIOS it will automatically restart.
- As with Procedure 1A, the first reboot will result in the following message: "Please Enter Setup
to recover BIOS Setting, CMOS Date/Time Not Set ". Press F1 and follow
Procedure 2 (Step 2) below.
Procedure 2 - for configuring the BIOS
- Press the [Delete] key the during POST screen to enter BIOS setup.
- Go to the 'Exit' menu. Choose 'Load Setup Defaults'.
- Below is a tree of the recommended settings
to change from the defaults. Some may vary depending on preference and
system build (for example you would not disable the Serial Port if you where using the Serial Port header).
|
|
|
May 2011 |
|
The HOT SWAP SATA RAID-1 KIT is a high-performance and
extremely flexible solution for RAID 1 disk mirroring.
With a cost effective SATA approach, the ACS-75170
mirrors data to the other disk drive simultaneously,
and delivers optimized performance. If one drive
fails, data is secured by the other drive and alarm
sounds to alert you.
Featuring intelligent online
recovery, ACS-75170 let you hot swap a failed drive
and it automatically rebuilds the data to the new
drive without any system down time. The 75170 RAID box
features a user-friendly rack design that lets you
easily install a backup drive, or replace a drive that
fails. Each hard drive carrier supports a one-inch high 3.5 inch
for factor disk drive. Additional data security is provided
by a key-locking system, that prevents unauthorized
access to each disk drive.
Specification
|
Host interface :
|
SATA
|
|
RAID level :
|
1
|
|
Form factor :
|
two 5.25 inch half height
* Support 2 SATA disk channels
*Support one SATA host channel
*Support RAID level 1
*OS independent (No driver needed)
* 2MByte memory buffer
*Support front panel disk operation LED indicator
|
|
Features :
|
*Disk hot swapping supported
*Automatic drive failure detection
*Automatic on-line drive re-build
* Audible alarm on drive failure
* Battery backup for disk rebuild status
*Support ATA-6 big drive function
* Support GUI 7 series spec. (Rev. 1.01 or above)-
|
Click here to return
5HTB
|
|
|
May 2011 |
This is a work in progress.
List of Advanced Format drives:
- WDC Caviar Green 1TB, 1.5TB, 2TB drives that have:
- 64MB cache
- EARS in the model number e.g. WD10EARS
List of OS support:
- Windows Vista SP1 or later
- Windows 7
- Windows Server 2008
Useful Links
|
|
|
May 2011 |
Key Features
- GPU Boost - Go to the Limit with iGPU Level Up!
- USB 3.0 - High Speed Transfer Technology
- SATA 3.0Gb/s
- EFI BIOS
- B3 Revision
Specifications
| CPU |
Intel® Socket 1155 for Intel® 2nd Generation Core™ i7 Processor/Core™ i5 Processor/Core™ i3 Processor Support Intel® 32nm CPU
Supports Intel® Turbo Boost Technology 2.0
|
| Chipset |
Intel® H61 Express Chipset |
| Memory |
2 x DIMM, Max. 16 GB, DDR3 1333/1066 Non-ECC,Un-buffered Memory
Dual Channel memory architecture
|
| Expansion Slots |
1 x PCIe 2.0 x16
|
| VGA |
Supports HDMI with Max. Resolution 1920 x 1200 @60Hz (under discussion)
Supports DVI with Max. Resolution 1920 x 1200 @60Hz
Supports D-Sub with Max. Resolution 2048 x 1530 @75Hz
|
| Storage |
Intel® H61 Express Chipset
4 xSATA 3.0 Gb/s ports (blue)
|
| LAN |
Realtek Gigabit LAN Controller
|
| Audio |
8-Channel High Definition Audio CODEC
|
| USB |
Chipset built-in
- 2 x USB 3.0/2.0 ports
Chipset built-in
- 8 x USB 2.0/1.1 ports (4 ports at mid-board, 4 ports at back panel)
|
| Back Panel I/O Ports |
1 x PS/2 Keyboard/Mouse Combo port
1 x DVI
1 x D-Sub
1 x HDMI
1 x LAN(RJ45) port(s)
2 x USB 3.0/2.0
4 x USB 2.0/1.1
6 -Channel Audio I/O
|
| Internal I/O Connectors |
2 x USB 2.0/1.1 connector(s) support additional 4 USB 2.0/1.1 ports
4 x SATA 3.0Gb/s
1 x CPU Fan connector(s) (4pin)
1 x Chassis Fan connector(s) (4pin)
1 x S/PDIF Out connector
1 x 24-pin ATX Power connector
1 x 4-pin ATX 12V Power connector
1 x Front panel audio connector
1 x System Panel connector
1 x Clear CMOS jumper
|
| Form Factor |
Mini ITX Form Factor
6.75 inch x 6.75 inch ( 17.1 cm x 17.1 cm ) |
Click here to return
1AP8H61
|
|
|
|
|
<< Start < Prev 161 162 163 164 165 166 167 168 169 170 Next > End >>
|
| Results 1441 - 1449 of 2511 |
