|
April 2011 |
The Switch provides a combination of 24 Fast Ethernet Switching ports
that provide users with highspeed network connections. With its
Auto-Negotiation capability, all the RJ-45/STP ports of FNSW-2401 can be
configured to speeds of 10/20Mbps or 100/200Mbps automatically. What's
more is the MDI/ MDIX auto-detection for easy, plug and play connection,
careless the cabling type, straight through or crossover.
The high performance throughput (filtering/forwarding rate: 14,880
packets per second in 10Mbps, 148,800pps in 100Mbps) and dynamic shared
memory buffer, helps FNSW-2401 can boost bandwidth, eliminate
unnecessary traffic, and relieve congestion on your critical server
path. FNSW-2401 - 24-port 10/100Base-TX Ethernet switch, designed for
low cost / high performance and ease of installation, should be the
choice of your switched networks.
Key Features
• Comply with IEEE 802.3u, 100Base-TX, IEEE 802.3 10Base-T standards 24-port 100Base-TX Fast Ethernet Switch
• Each switching ports support auto-negotiation -10/20Mbps, 100/200Mbps supported
• Filtering/Forwarding rate: 148800pps for100Mbps, 14880pps for 10Mbps
• High performance Store-and-Forward switching technology
• Runt & CRC filtering eliminates erroneous packets to optimize the network bandwidth
• IEEE 802.3x full-duplex flow control, half-duplex back-pressure flow control
• Auto MDI/MDI-X on each port for easy switch/hub cascading
|
|
|
Specification
|
| Model |
FNSW-2401 |
| |
| Standard Compliance |
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
|
| 10/100Base-TX Ports |
24
|
| Network Speed |
TP: Auto-Negotiation, 10/20Mbps, 100/200Mbps
|
| Switching Architecture |
Store & Forward
|
| Filtering / Forwarding Rate |
100Mbps: 148800 packets / second
10Mbps : 14880 packets / second
|
| MAC entry |
8K
|
| LED Indicators/port |
2 (Link/Act, 100Mbps)
|
| Data Buffer |
512KB
|
| Dimension (W x D x H) |
444 x 120 x 44 mm
|
| Operation Environment |
Temperature: 0~50 Degree C (operating)
Humidity: 0~90%, non-condensing
|
| Network Media |
100Base-TX: RJ-45 STP/UTP, Category 5 cable
10Base-T: RJ-45 STP/UTP, Category 3~5 cable
|
| Certification |
FCC class A, CE |
|
Click here to return
FNSW-2401
|
|
|
April 2011 |
The Switch provides a combination of 16 Fast Ethernet Switching ports
that provide users  with highspeed network connections. With its
Auto-Negotiation capability, all the RJ-45/STP ports of FNSW-1601 can be
configured to speeds of 10/20Mbps or 100/200Mbps automatically. What's
more is the MDI/ MDIX auto-detection for easy, plug and play connection,
careless the cabling type, straight through or crossover.
The high performance throughput (filtering/forwarding rate: 14,880
packets per second in 10Mbps, 148,800pps in 100Mbps) and dynamic shared
memory buffer, helps FNSW-1601can boost bandwidth, eliminate unnecessary
traffic, and relieve congestion on your critical server path.
FNSW-1601 - 16-port 10/100Base-TX Ethernet Switches, designed for low
cost / high performance and ease of installation, should be the choice
of your switched networks.
Key Features
• Comply with IEEE 802.3u, 100Base-TX, IEEE 802.3 10Base-T standards
• 16-port 100Base-TX Fast Ethernet Switch
• Each switching ports support auto-negotiation -10 / 20Mbps, 100 / 200Mbps supported
• Filtering / Forwarding rate: 148800pps for100Mbps, 14880pps for 10Mbps
• High performance Store-and-Forward switching technology
• Runt & CRC filtering eliminates erroneous packets to optimize the network bandwidth
• IEEE 802.3x full-duplex flow control, half-duplex back-pressure flow control
• Auto MDI / MDI-X on each port for easy switch / hub cascading
|
|
|
Specification
|
| Model |
FNSW-1601 |
| |
| Standard Compliance |
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
|
| 10/100Base-TX Ports |
16
|
| Network Speed |
TP: Auto-Negotiation, 10/20Mbps, 100/200Mbps
|
| Switching Architecture |
Store & Forward
|
| Filtering / Forwarding Rate |
100Mbps: 148800 packets / second
10Mbps : 14880 packets / second
|
| MAC entry |
8K
|
| LED Indicators/port |
2 (Link/Act, 100Mbps)
|
| Data Buffer |
512KBytes
|
| Power Supply |
100~240VAC auto-sensing
|
| Operation Environment |
Temperature: 0~50 Degree C (operating)
Humidity: 0~90%, non-condensing
|
| Dimension (W x D x H) |
444 x 120 x 44 mm
|
| Network Media |
100Base-TX: RJ-45 STP/UTP, Category 5 cable
10Base-T: RJ-45 STP/UTP, Category 3~5 cable
|
| Certification |
FCC class A, CE |
|
Click here to return
FNSW-1601
|
|
|
April 2011 |
The FSD-803 Fast Ethernet Switch is a Simple and cost-effective, highly
reliable network switch.  And is the ideal device for bridging Ethernet
to Fast Ethernet workgroups or networks. Therefore, the Switches will be
the fast being recognized as one of the most important building blocks
for today networking technology.
To segment the network, ease the network traffic, the 8-port 10/100Mbps
are useful for the SOHO switched networks as the friendly network
backbone. Provides array LED indicators, the network status can be
monitored at a glance.
Key Features
• Comply with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX
• 8-port 10/100Mbps Auto-Negotiation ports-- 10/20Mbps, 100/200Mbps Auto-sensing
• Compact size design for wall mount or desktop placement
• High performance Store-and-Forward Switching Architecture
• Runt and CRC filtering
• Flow control (Back Pressure) supports in half-duplex mode
• 1K MAC Address Table, automatically learning and aging
• LED indicators array for easy diagnostic, troubleshooting
• Plug-and-Play Installation
|
|
|
Specification
|
| Model |
FSD-803 |
| |
| Standard |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
|
| Ports |
8-STP
|
| LED Display |
One for Power, One for Link / Act, One 100 per port
|
| MAC Address |
1K
|
| Data Buffer |
1-Mbit packet buffer
|
| Dimensions (W x D x H) |
160 x 80 x 28 mm
|
| Power Requirement |
DC 12V, 500mA
|
| Temperature |
Operating: 0~50 Degree C, Storage: -10~70 Degree C
|
| Humidity |
Operating: 10~90%, Storage: 5~90%
|
| Emission |
FCC Class B CE |
|
Click here to return
FSD-803
|
|
|
April 2011 |
The WBT-200 is a high performance bi-directional amplifier operating on
the 2.4GHz frequency band. It can be installed indoor to extend the
effective radio range. Moreover, the increased signal strength reduces
packet retransmisions which caused by reception errors, and helps to
provide a stable wireless connection. The intallation of WBT-200 is
quick and easy, no additional software or configuration needed. To
accommodate different environmental requirements, the output power of
WBT-200 is adjustable: 100mW (20dBm), 200mW (23dBm), and 500mW (27dBm).
Compatible with both 802.11b and 802.11g standards, the WBT-200 can
significantly eliminate the dead spots of your 2.4GHz indoor WLAN.
Key Features
• 2400~2500MHz ISM band, unlicensed operation
• Compatible with 802.11b and 802.11g equipments
• Adjustable output power: 100/200/500mW
• Increase both transmit and receive gain
• Maintain a stable wireless connection quality
• Extend the effective range of existing WLAN
• Plug-and-Play installation
|
|
|
Specification
|
| Model |
WBT-200 |
| Product |
| Operating Frequency |
2400~2500MHz
|
| Transmitter Output Power |
100/200/500mW (20/23/27dBm)
|
| Transmitter Input Power |
8~18dBm
|
| Receiver Gain |
10~13dBm
|
| Frequency Response Flatness |
+/- 1dB over operating temperature
|
| Rx Noise Figure |
3.5dB typical
|
| RF Input Connector |
Reversed SMA
|
| Antenna Connector |
Reversed SMA
|
| RF Cable |
SMA to SMA
Length: 75cm
|
| DC Surge Protection |
Available
|
| Dimension (W x D x H) |
75 x 56 x 25mm |
| Operating Temperature |
0-45 degree C
|
| Relative Humidity |
10-90%, non-condensing
|
| Power Requirement |
12V DC, 1.25A
|
| STANDARDS COMPLIANCE |
| Electromagnetic Compatibility |
FCC |
|
Click here to return
WBT-200
|
|
|
April 2011 |
The PLANET 802.11g Wireless ADSL 2/2+ VPN Firewall Router, ADW-4302v2,
provides office an d residential users the ideal solution for sharing a
high-speed ADSL 2/2+ broadband Internet connection on a 54Mbps wireless
network and a 10/100Mbps Fast Ethernet backbone. They can support
downstream transmission rates of up to 24Mbps and upstream transmission
rates of up to 3.5Mbps. The product supports PPPoA (RFC 2364 - PPP over
ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or
routed), PPP over Ethernet (RFC 2516), and IPoA (RFC1577) to establish a
connection with ISP.
|
|
|
Specification
|
| Model |
ADW-4302A v2 / ADW-4302B v2 |
| Hardware |
| Standard |
Multi-Mode code support
ANSI T1.413 Issue 2
ITU-T G.994.1 (G.hs) rev. 3
ITU-T G.992.1(G.dmt)
- Annex A (ADSL over POTS for ADW-4302v2A)
- Annex B (ADSL over ISDN for ADW-4302v2B)
ITU-T G.992.2(G.lite)
ITU-T G.992.3 Annex A ADSL2
ITU-T G.992.3 Annex A DELT
ITU-T G.992.3 Annex L READSL2
ITU-T G.992.5 Annex A ADSL2+
|
| Protocol |
RFC 2364 - PPP over ATM (LLC/VCMUX)
RFC 2516 - PPP over Ethernet (LLC/VCMUX)
RFC 1577 - Classic IP over ATM (LLC/VCMUX)
RFC 1483 - Bridged IP over ATM (LLC/VCMUX)
RFC 1483 - Routed IP over ATM (LLC/VCMUX)
|
| AAL and ATM Support |
Integrated ATM AAL5 support
255 VPI plus 65535 VCI address range
|
| Ports LAN |
4 (10Base-T/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X)
|
| Ports Wireless |
1 x 802.11g wireless access point, antenna detachable
|
| Ports WAN |
1 (RJ-11, 10/100Base-TX, Auto-Negotiation)
|
| LED Indicators |
PWR, STATUS, WLAN, ADSL
100 LNK/ACT, 10 LNK ACT for each LAN port
|
| Button |
1 for reset/factory reset
|
| Wireless Standard |
IEEE 802.11b, IEEE 802.11g WLAN
|
| Frequency |
2.4 to 2.4835GHz (Industrial Scientific Medical Band )
|
| Channels |
Maximum 14 Channels, depending on regulatory authorities
|
| Modulation |
CCK, DQPSK, DBPSK, OFDM/CCK
|
| Data Rate |
Up to 54 Mbps
|
| WEP |
64-bit, 128-bit
|
| WPA-PSK |
256-bit
|
| Output Power |
13dBm (typical)
|
| Receiver Sensitivity |
-80dBm Min.
|
| Software |
| Protocol |
IP, NAT, ARP, ICMP, DHCP, PPPoE, PPPoA, IPoA, RIP1/2, SNMPv1
|
| Security |
Native NAT firewall, Enhanced policy-based+ SPI firewall, URL Filter, Access Control, Blocking log, Virtual Server, DMZ
|
| VPN termination |
IPSec tunnel
8 simultaneous tunnels (Main Mode)
Throughput 1.5Mbps
DES/3DES encryption
IKE support with pre-shared key
IP address or FQDN identification
MD5, SHA-1 Authentication
PPTP server (Microsoft VPN) support
|
| Management |
Web browser management
|
| Environment Specification |
| Dimension (W x D x H) |
175 x 114 x 29 mm
|
| Power |
12V DC, 1A
|
| Power Consumption |
Maximum 9.6W, 32.7 BTU
|
| Temperature:Humidity |
Operating: 0~40 Degree C, Storage: -10~70 Degree C, 0~90% (non-condensing)
|
| Emission |
FCC, CE |
|
Click here to return
PADW4302A
|
|
|
