|
April 2011 |
Key Features
1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 256GB DDR3 1600MHz ECC Registered DIMM; 8x DIMM sockets
4. Expansion slots: 1 x24 left hand riser+ 1 x8 for SMCI storage AOC (support up to 3 add-on cards)
5. Intel® i350 Dual port GbE LAN
6. 5x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 3x USB 2.0 ports (2 rear, 1 Type-A)
Specifications
 |
| MBD-X9DRT-HF -O |
- X9DRT-HF (Standard Retail Pack)
|
| MBD-X9DRT-HF -B |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 6.8" x 16.64" (17.2cm x 42.3cm)
|
| |
 |
| CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| |
 |
| Memory Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 64 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
|
| SATA |
- SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC with graphic controller)
|
| Super I/O |
|
| |
 |
| SATA |
- 5x SATA 2.0 ports (3Gbps)
- 2x SATA 3.0 ports (6Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 3x USB 2.0 ports (2 rear + 1 Type-A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
 |
 |
| 2U Chassis |
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
|
| |
 |
| PCI-Express |
- 1 x24 left hand riser + 1 x8 slot for SMCI AOC
(Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)
|
| |
 |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
 |
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
 |
| Voltage |
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend Static indicator LED
- UID/Remote UID
|
| Other Features |
|
|
Click here to return
SX8DTT-F
|
|
|
April 2011 |
Key Features
1. IntelXeon processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Intel 5520 (Tylersburg) Chipset
3. Up to 192GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 48GB
Unbuffered DIMM
4. Intel 82576 Dual-Port Gigabit
Ethernet
5. 6x SATA2 (3 Gbps) Ports via
ICH10R Controller
6. 1 (x16) PCI-E 2.0,
2 (x8) PCI-E 2.0,
1 (x4) PCI-E (in x8 slot),
2x PCI 33MHz slots
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN
Specifications
 |
| Form Factor |
|
| Dimensions |
- 12" x 13" (30.5cm x 33cm)
|
| |
 |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
 |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit 2C 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 |
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
|
 |
| |
 |
| PCI-Express |
- 1 (x16) PCI-E 2.0 slot
- 2 (x8) PCI-E 2.0 slots
- 1 (x4) PCI-E slot
|
| PCI |
|
| |
 |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
 |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
|
| Power Configurations |
- ACPI / ACPM Power Management
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
 |
| |
|
| Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Click here to return
SX8DTIF
|
|
|
April 2011 |
Key Features
- Dual socket R (LGA 2011) supports Intel C602 chipset; QPI up to 8.0GT/s
- Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
- Expansion slots: 3x PCI-E 3.0 x16 and 3x PCI-E 3.0 x8
- Intel® i350 Dual port GbE LAN
- 8x SATA2 and 2x SATA3 ports
- Integrated IPMI 2.0 and KVM with Dedicated LAN
- 8. 11x USB 2.0 ports (4 rear, 6 via header + 1 Type A)
Specifications
 |
| MBD-X9DRi-F -O |
- X9DRi-F (Standard Retail Pack)
|
| MBD-X9DRi-F -B |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 12" x 13" (30.5cm x 33.2cm)
|
| |
 |
| CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| |
 |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
|
| AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| SCU SATA (Storage Controller) |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC with graphic controller)
|
| Super I/O (option) |
|
| |
 |
| AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
| SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 11x USB 2.0 ports total
(4x rear + 6x via header + 1x Type A)
|
| Video |
|
| Serial Port / Header |
- 2x Fast UART 16550 ports: 1 rear and 1 header
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
 |
 |
| 2U Chassis |
|
| 3U Chassis |
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
- Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
|
| |
 |
| PCI-Express |
- 3x PCI-E 3.0 x16 slots
- 3x PCI-E 3.0 x8 slots
(Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)
|
| |
 |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
 |
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI / APM Power Management
- Main Switch Override Mechanism
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
| |
 |
| Voltage |
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers (up to 8 fans)
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|
Click here to return
SX8DAi
|
|
|
April 2011 |
Key Features
1. Intel Xeon processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Intel 5520 (Tylersburg) Chipset
3. Up to 192GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 48GB
Unbuffered DIMM
4. Dual Intel 82574L Gigabit Ethernet
5. 6x SATA2 (3Gbps) Ports via
ICH10R Controller
6. 1 (x16) PCI-E 2.0,
2 (x4) PCI-E 2.0 (in x 8 slot),
1 (x4) PCI-E (in x 8 slot),
3x PCI-X 133/100MHz slots
7. Realtek ALC888 7.1 HD Audio
8. 2x IEEE 1394a Headers
Specifications
 |
| Form Factor |
|
| Dimensions |
- 12" x 13" (30.5cm x 33cm)
|
| |
 |
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
 |
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
% 9
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 |
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers |
- 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- Realtek ALC888 7.1 HD audio
|
| Super I/O |
|
| |
 |
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
|
| USB |
- 4x USB rear ports
- 4x USB internal headers
- Total 9 USB 2.0 Compliant
|
| Audio |
- Realtek ALC888 7.1 HD audio
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port |
- 2 Fast UART 16550 serial ports
|
| Firewire |
|
|
 |
| |
 |
| PCI-Express |
- 1 (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x8 slot)
- 1 (x4) PCI-E (in x8 slot)
|
| PCI-X |
- 3x 133/100MHz PCI-X slots
|
| |
 |
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
 |
| |
|
| Power Configurations |
- ACPI / ACPM Power Management
|
| |
 |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
 |
| |
|
| Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
Click here to return
SX8DAE
|
|
|