Compucon Computers NZ - Quality Servers and Workstations

M/BOARD E-ATX Intel 5000P Dual Xeon with AIC-7902 Dual-Channel Ultra320 SCSI

April 2011

Key Features

1. Quad & Dual Core Intel 64-bit Xeon
    Support, 667 / 1066 / 1333MHz FSB
2. Intel® 5000P (Blackford) Chipset
3. Up to 32GB DDR2 667 & 533 SDRAM
    Fully Buffered DIMM (FB-DIMM)
4. Intel (ESB2/Gilgal) 82563EB Dual-port
    Gigabit Ethernet Controller
5. Adaptec AIC-7902 Dual Channel
    Ultra320 SCSI
6. 6x SATA 3.0Gbps Ports via
    ESB2 Controller
7. Left Universal Slot:
    1 64-bit 100MHz PCI-X OR
    1 (x8) PCI-Express
8. Right Universal Slot:
    1 64-bit 100MHz PCI-X OR
    1 (x8) PCI-Express
9. Zero-Channel RAID Support
10. ATI ES1000 Graphics with
    16MB video memory
11. IPMI 2.0 (SIMSO) Socket

Specifications

Physical Stats

Form Factor	Extended ATX
Dimensions	13.05" x 12" (33.1cm x 30.5cm)


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz
System Bus	1333 / 1066 / 667 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported
Memory Type	667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	256 MB, 512 MB, 1GB, 2GB, 4GB
Memory Voltage	1.8V only 1.5V(AMB)
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5000P (Blackford) chipset MCH + ESB2
SCSI	Adaptec AIC-7902 Controller Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives) 1 Internal Channel, 1 External Channel Host RAID 0, 1, & 10 support
RAID	Support for Zero-Channel RAID Optional: (Card not included) RAID 0, 1, 5, 10
SATA	Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI SO-DIMM Socket (SIMSO)
Network Controllers	Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics	ATI ES1000 controller with 16 MB of video memory
Clock Generator	CK410B
Super I/O	Winbond 83627HG chip


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 4x USB internal headers Total 6 USB 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header


Expansion Slots

Left Universal Slot	1 64-bit 100MHz PCI-X OR 1 (x8) PCI-e Slot
Right Universal Slot	1 64-bit 100MHz PCI-X OR 1 (x8) PCI-e Slot


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.3 PCI 2.2 ACPI 1.0 USB Keyboard support


Management

Software	Optional IPMI (Intelligent Platform Management Interface) 2.0 Watch Dog NMI
Power Configurations	ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup form Soft-Off Power-on mode for AC power recovery Internal / External modem remote ring-on


PC Health Monitoring

CPU	Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V, 1.5V, +5V Standby, VBAT 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Support 3-pin fans Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 5x fan connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby Alert LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support


Operating Environment / Compliance

Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Click here to return

SX7DBR8

M/BOARD EATX Intel 5000P

April 2011

Key Features

1. Quad & Dual Core Intel 64-bit Xeon
    Support, 667 / 1066 / 1333MHz FSB
2. Intel® 5000P (Blackford) Chipset
3. Up to 32GB DDR2 667 & 533 SDRAM
    Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB Dual-port
    Gigabit Ethernet Controller
5. 6x SATA 3.0Gbps Ports via ESB2 Controller
    SATA Controller
6. 2 (x8) & 1 (x4) PCI-Express,
    2x 64-bit 133MHz PCI-X,
    1x 64-bit 100MHz PCI-X
7. ATI ES1000 Graphics with
    16MB video memory
8. SIMLP IPMI 2.0

Specifications

Physical Stats

Form Factor	Extended ATX
Dimensions	12" x 13.05" (30.5cm x 33.2cm)


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus	1333 / 1066 / 667 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported
Memory Type	667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB
Memory Voltage	1.8V only 1.5V(AMB)
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5000P (Blackford) chipset MCH + PXH + ESB2
SATA	Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP)
Network Controllers	Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics	ATI ES1000 controller with 16 MB of video memory
Super I/O	Winbond 83627HG chip


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header
Parallel Port	1 ECP / EEP parallel port


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 ACPI 1.0 USB Keyboard support Hardware BIOS Virus protection


Expansion Slots

PCI-Express	2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot 1 SEPC (PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
PCI-X	2x 64-bit 133MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot


Management

Software	Optional IPMI (Intelligent Platform Management Interface) 2.0 Watch Dog NMI
Power Configurations	ACPI Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal / External modem remote ring-on


PC Health Monitoring

CPU	Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support
LED	CPU / System Overheat LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support


Operating Environment / Compliance

Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Click here to return

SX7DBE

M/BOARD E-ATX Intel 5000X

April 2011

Key Features

1. Quad & Dual Core Intel® 64-bit Xeon
    Support, 667 / 1066 / 1333MHz FSB
2. Intel® 5000X (Greencreek) Chipset
3. Up to 32GB 667/533MHz DDR2 ECC
    FB-DIMM (Fully Buffered DIMM)
4. Intel® (ESB2/Gilgal) 82563 Dual-port
    Gigabit Ethernet Controller
5. 6x SATAII Ports via ESB2 Controller
6. 1 (x16) & 1 (x4 in x16) PCI-Express,
    2x 64-bit 133/100MHz PCI-X,
    1x 64-bit 100MHz PCI-X,
    1x 32-bit PCI 33MHz
7. Low Profile IPMI 2.0 (SIMLP) Slot

Specifications

Physical Stats

Form Factor	Extended ATX
Dimensions	12" x 13.05" (30.5cm x 33.2cm)


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor) up to 3.40 GHz
System Bus	1333 / 1066 / 667 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs Memory Mirroring supported
Memory Type	667 / 533MHz FB-DIMM (Fully Buffered DIMM) DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB
Memory Voltage	1.8V only 1.5V(AMB)
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5000X (GreenCreek) chipset MCH + PXH-V + ESB2
SATA	ESB2 SATAII Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
Network Controllers	Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O	Winbond 83627HF chip
Clock Generator	CK410B chip


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	4x USB rear ports 1x USB internal header 6 total USB ports, 2.0 Compliant / 1.1 Compliant
Audio	AC97 Audio
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header
Parallel Port	1 ECP / EEP parallel port


Expansion Slots

PCI-Express	1 (x16) PCI-e slot 1 (x4) PCI-et (using x16) slot
PCI-X	2x 64-bit 133/100MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot
PCI	1x 32-bit 33MHz PCI (5V) slot


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 ACPI 1.0 PCI-X 1.0 USB Keyboard support Hardware BIOS Virus protection


Management

Software	Optional IPMI (Intelligent Platform Management Interface) v2.0 Watch Dog NMI
Power Configurations	ACPI Power Management Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem remote ring-on


PC Health Monitoring

CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, -12V & +5V Standby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of eight 4-pin fans 8x fans with status monitoring Status monitor for speed control Support 3-pin fans Low noise fan speed control
Temperature	Monitoring for CPU and chassis, environment CPU thermal trip support PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support
LED	CPU / System Overheat LED
Other Features	Chassis intrusion detection Chassis intrusion header


Operating Environment / Compliance

Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Click here to return

SX7DAE+

PROCESSOR BLADE 7126T-T1L

April 2011

Key Features
1. Intel Xeon processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Intel 5500 (Tylersburg) Chipset
3. Up to 96GB DDR3 1333/ 1066/ 800MHz
    ECC Registered DIMM / 24GB
    Unbuffered DIMM
4. Intel 82576 Dual-Port Gigabit
    Ethernet
5. 2 x 3.5" Hot-Plug SATA Drive Trays
6. Integrated Matrox G200eW Graphics

Specifications

Product SKUs

SBI-7126T-T1L	Processor Blade SBI-7126T-T1L (Black)


Motherboard

Super B8DTL-L


Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI	up to 6.4 GT/s


System Memory

Memory Capacity	6x 240-pin DIMM sockets Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V and 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5500 (Tylersburg) chipset ICH10R + IOH-24D
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1 support
IPMI	Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization
Super I/O	Winbond 83527HF chip
Clock Generator	CK505 chip


System BIOS

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support


Dimensions

Height	11.32" (288 mm)
Width	1.67" (42.4 mm)
Depth	18.9" (480mm)
Weight	8.6 lbs (3.9 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button KVM button
LEDs	Power LED UID / KVM LED Network Activity LED Fault LED
Connector	SUV (Serial/USB/Video) & KVM Connector


Drive Bays

Hot-swap	2x 3.5" SATA Hot-swap drive bays


Input / Output

KVM	1 Front Connector for Supermicro KVM Card


Operating Environment / Compliance
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Click here to return

S7126T-T1L

SUPERBLADE OFFICE SERVER ENCLOSURE 710E-D28 - 7U 19"

April 2011

Enclosure

Processor Blade	Up to 14 hot-plug processor blades
Module Support	Supports Intel based blades
LED	Power LED, Fault LED
InfiniBand Switch	Supports one hot-plug DDR IB switch
Gigabit Ethernet Switch / Pass-Through Module	Supports up to two hot-plug Gigabit Ethernet switches / Pass-Through Modules
Management Module	Up to 2 hot-plug management modules providing remote KVM and IPMI 2.0 functionalities One management module comes standard with each enclosure
Power Supply	Up to four hot-swap 1400W / 1620W power supplies, N+1 redundant
Cooling Design	Up to 8 cooling fans
Dimensions (HxWxD)	12.1" x 18.5" x 29"

Click here to return

S710ED28

More...

<< Start < Prev 161 162 163 164 165 166 167 168 169 170 Next > End >>

Results 1495 - 1503 of 2512

Main Menu

Members Menu