|
May 2016 |
Data center, IT, and general consumer server environments have a broad range of requirements — from basic connectivity to extreme data storage capacities. The effectiveness at which their data is accessed and protected is crucial to their ultimate success. The Adaptec Series 8 12Gb/s RAID Adapter product family directly addresses the connectivity, performance, and data protection needs, unmatched by anything in the industry.
The Adaptec Series 8 RAID adapter family features PMC’s 12Gb/s RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 12Gb/s SAS ports to enable a new generation of high- performance RAID adapters for the 12Gb/s storage ecosystem. Adaptec Series 8 RAID adapters are available with 4, 8, or 16 native SAS/SATA ports in an LP/MD2 form factor. The mini SAS HD connectors combined with SAS HD cables allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor.
3A8405
Specifications
Bus System Interface
8-lane PCIe Gen3
Connector Configuration
2One internal mini SAS HD (SFF-8643)
Package Contents
• Adaptec RAID 8405 adapter
• Additional low profile vented bracket
Management Utilities
• Adaptec maxView Storage Manager
• Web based GUI Management Utility
• OS Support: Windows, Linux, Solaris VMware
• Remote configuration, monitoring & notification
• Remote firmware updates
• SMI-S Support
• SNMP, SMTP
ARCCONF
• Command Line Interface
• SMI-S support for VMware
Adaptec BIOS Configuration Utility (CTRL+A)
• BIOS level configuration utility
• Flashable BIOS support
Adaptec uEFI BIOS Configuration Utility
• HII based confi guration utility
• Flashable BIOS support
Physical Size
2.535"H x 6.6"L (64mm x 167mm)
Operating Temperature
0°C to 55°C* (with 200 LFM airflow without AFM-700)
0°C to 50°C* (with 200 LFM airflow with AFM-700)
Note: This Adaptec card contains a powerful RAID processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with recommended airflow (200 LFM).
Operating Voltage
0.1A @ 3.3VDC
1.2A @ 12VDC
Regulatory Certifications
CE, FCC, UL, C-tick, VCCI, KCC, CNS
Environmental Compliance
RoHS
Mean Time Before Failure (MTBF)
775,000 hours at 40°C
Supported Operating Systems
Microsoft Windows
Red Hat Linux
SUSE Linux
Fedora
Debian Linux
Ubuntu Linux
Sun Solaris
FreeBSD
VMware ESXi
Benefits
Ideal for 12Gb/s performance-hungry server and workstations platforms, without compromising proven Adaptec reliability.
Key Differentiators
Third generation ZMCP; AFM-700
LP MD2 form factor for up to 16 native SAS/SATA ports
Customer Needs
High I/O transaction and high bandwidth processing; solutions that reduce energy consumption and maintenance costs.
Form Factor
MD2 – Low Profile
Cache Memory
1024MB
Key RAID Features
• Flexible Configuration: HBA Mode & Auto Volume Mode for automatic deployment
• Optimized Disk Utilization (Multiple Arrays per disk)
• Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60
• Support for native 4K sector SAS and SATA devices in addition to 512byte sector devices
• Hybrid RAID 1 & 10
• Quick initialization
• Online Capacity Expansion
• Performance modes: Dynamic, OLTP & Big Block ByPass
• Copyback Hot Spare
• Dynamic caching algorithm
• Native Command Queuing (NCQ)
• Background initialization
• Hot-plug drive support
• RAID Level Migration
• Hot spares - global, dedicated, and pooled
• Automatic/manual rebuild of hot spares
• SES and SAF-TE enclosure management
• Configurable stripe size
• S.M.A.R.T. support
• Multiple arrays per disk drive
• Dynamic sector repair
• Staggered drive spin-up
• Bootable array support
• Support for Tape Devices, Autoloaders
• MSI-X support for all device driver for all supported Operating Systems
• Secure boot support for the uEFI host bios
• USB image available, after shipping, on start.adaptec.com to boot maxView GUI from any USB device for enhanced GUI based setup and offline maintenance
|
|
|
May 2016 |
Data center, IT, and general consumer server environments have a broad range of requirements — from basic connectivity to extreme data storage capacities. The effectiveness at which their data is accessed and protected is crucial to their ultimate success. The Adaptec Series 8 12Gb/s RAID Adapter product family directly addresses the connectivity, performance, and data protection needs, unmatched by anything in the industry.
The Adaptec Series 8 RAID adapter family features PMC’s 12Gb/s RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 12Gb/s SAS ports to enable a new generation of high- performance RAID adapters for the 12Gb/s storage ecosystem. Adaptec Series 8 RAID adapters are available with 4, 8, or 16 native SAS/SATA ports in an LP/MD2 form factor. The mini SAS HD connectors combined with SAS HD cables allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor.
3A8805
Specifications
Bus System Interface
8-lane PCIe Gen3
Connector Configuration
2Two internal mini SAS HD (SFF-8643)
Package Contents
• Adaptec RAID 8805 adapter
• Additional low profile vented bracket
Management Utilities
• Adaptec maxView Storage Manager
• Web based GUI Management Utility
• OS Support: Windows, Linux, Solaris VMware
• Remote configuration, monitoring & notification
• Remote firmware updates
• SMI-S Support
• SMTP
ARCCONF
• Command Line Interface
• SMI-S support for VMware
Adaptec BIOS Configuration Utility (CTRL+A)
• BIOS level configuration utility
• Flashable BIOS support
Adaptec uEFI BIOS Configuration Utility
• HII based confi guration utility
• Flashable BIOS support
Physical Size
2.535"H x 6.6"L (64mm x 167mm)
Operating Temperature
0°C to 55°C* (with 200 LFM airflow without AFM-700) 0°C to 50°C* (with 200 LFM airflow with AFM-700)
Note: This Adaptec card contains a powerful RAID processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with recommended airflow (200 LFM).
Operating Voltage
0.1A @ 3.3VDC
1.2A @ 12VDC
Regulatory Certifications
CE, FCC, UL, C-tick, VCCI, KCC, CNS
Environmental Compliance
RoHS
Mean Time Before Failure (MTBF)
645,612 hours at 40°C
Supported Operating Systems
Microsoft Windows
Red Hat Linux
SUSE Linux
Fedora
Debian Linux
Ubuntu Linux
Sun Solaris
FreeBSD
VMware ESXi
Benefits
Ideal for 12Gb/s performance-hungry server and workstations platforms, without compromising proven Adaptec reliability.
Customer Needs
High I/O transaction and high bandwidth processing; solutions that reduce energy consumption and maintenance costs.
Form Factor
MD2 – Low Profile
Cache Memory
1024MB
Key RAID Features
• Flexible Configuration: HBA Mode & Auto Volume Mode for automatic deployment
• Optimized Disk Utilization (Multiple Arrays per disk)
• Supports up to 256 SAS or SATA devices using SAS expanders
• Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60
• Support for native 4K sector SAS and SATA devices in addition to 512byte sector devices
• Hybrid RAID 1 & 10
• Quick initialization
• Online Capacity Expansion
• Performance modes: Dynamic, OLTP & Big Block ByPass
• Copyback Hot Spare
• Dynamic caching algorithm
• Native Command Queuing (NCQ)
• Background initialization
• Hot-plug drive support
• RAID Level Migration
• Hot spares - global, dedicated, and pooled
• Automatic/manual rebuild of hot spares
• SES and SAF-TE enclosure management
• Configurable stripe size
• S.M.A.R.T. support
• Multiple arrays per disk drive
• Dynamic sector repair
• Staggered drive spin-up
• Bootable array support
• Support for Tape Devices, Autoloaders
• MSI-X support for all device driver for all supported Operating Systems
• Secure boot support for the uEFI host bios
• USB image available, after shipping, on start.adaptec.com to boot maxView GUI from any USB device for enhanced GUI based setup and offline maintenance
|
|
