Menu Content/Inhalt
Home

PLANET Ethernet Switch 24-Port 10/100Mbps + 2-Slot Gigabit Option Managed Print
April 2011
The PLANET FGSW-2402VS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots FGSW-2402VS.jpg(port25, 26). The two open slots can be installed by optionally two of 1000Base-T port, 100Base-FX, or 1000Base- SX/LX fiber-optic interfaces. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 15 kilometers (Single-mode, SC).

It is equipped with non-blocking 8.8Gbps backplane greatly simplifies the tasks of upgrading your LAN to cater for increased bandwidth demands.

Key Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
• 24-Port 10 / 100 Mbps Fast Ethernet Switch
• 2 open slots for 1000Base-T and 100Base-FX, 1000Base-SX / LX fiber-optic interface with various connection media and distances
• Each Switching ports support auto-negotiation-10 / 20, 100 / 200Mbps supported
• Auto-MDI / MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
• 8K MAC address table, automatic source address learning and ageing
• 512K Bytes packet buffers
• Web interface for Switch basic management and setup
• Support Port-Based VLAN and 802.1Q VLAN, up to 26 VLAN groups
• Support up to 7 Trunk groups, each trunk for up to maximum 8 port with 800Mbps bandwidth
• Port mirroring allows monitoring of the traffic across any port in real time
• Support QoS and bandwidth control on each port
• Supports Access Control List function
• 19-inch rack mount size
• Internal full-range power supply suitable for worldwide use
• EMI standards comply with FCC, CE class A

Specification
Model FGSW-2402VS  
Hardware Specification
Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
Module Slots 2 open slots for 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface
Switch Processing Scheme Store-and-forward
Throughput (packet per second) 6.547Mpps
Switch fabric 8.8Gbps
Address Table 8K entries
Share data Buffer 512K Bytes
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions (W x D x H) 440 x 120 x 44 mm, 1U height
Weight FGSW-2402VS: 1.87kg
Power Requirement 100~240V AC, 50-60 Hz
Power Consumption / Dissipation 13.5 Watts maximum / 46 BTU/hr maximum
Temperature Operating: 0~50 Degree C, Storage: -40~70 Degree C
Humidity Operating: 10~90%, Storage: 5~95% (Non-condensing)
Smart function
System Configuration Web interface
Port Status Display per port's disable/enable status, per port's link status and speed duplex mode. Also the Flow control status
Port Configuration Per port disable/enable
Auto-negotiation disable/enable
10/100Mbps full and half duplex mode selection
Flow control disable/enable and bandwidth control on each port
Trunk Configuration Support 7 groups of 8-Port trunk support
VLAN Configuration Maximum up to 26 VLAN groups for Port-based/802.1Q VLAN
Port Monitoring One Mirroring port to monitor one mirrored port. The monitor modes are RX, TX and RX & TX
QoS Configuration IEEE 802.1p QoS on each port
Port counters Display detail traffic counters on each port
Access Control List Supports up to 16 Access Control list group
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3, Ethernet
IEEE 802.3u, Fast Ethernet
IEEE 802.3ab,Gigabit Ethernet
IEEE 802.3z, Gigabit Ethernet
IEEE 802.3x, Full-duplex flow control
IEEE 802.1p, QoS
IEEE 802.1Q, Tag VLAN


























































Click here to return
FGSW-2402VS