|
PLANET 24-Port 10/100Mbps with 12-Port PoE +2 Gigabit Web Smart Ethernet Switch |
|
|
April 2011 |
The new FGSW-2612PVS provides 24 10/100Mbps Fast
Ethernet ports and 2 Gigabit TP /SFP combo ports, the two Gigabit ports
either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through
SFP (Small Factor Pluggable) interface. The distance can be extended
from 100 meters (TP), 550 meters (Multi-mode fiber), up to above
10/50/70/120 kilometers (Single-mode fiber).
Key Features
- Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard
- 24-Port 10/100Mbps Fast Ethernet Switch
- 2-Port Gigabit TP/SFP combo ports
- 24-Port PoE output
- Each Switching port supports auto-negotiation-10/20, 100/200Mbps supported
- Supports IEEE 802.3af 15.4 watts power output on each port
- Auto-MDI/MDI-X detection on each RJ-45 port
- Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full- duplex)
- High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- 8K MAC address table, automatic source address learning and ageing
- 512K Bytes packet buffers
- Web interface for Switch basic management and setup
- Supports up to 26 IEEE 802.1Q or Port-based VLAN groups
- Supports up to 7 Trunk groups, each trunk for up to maximum 8 port with 800Mbps bandwidth
- Port mirroring allows to monitor the traffic across any port in real time
- Supports QoS and bandwidth to control each port
- Supports Access Control List function
- 19-inch rack mount size
- Internal full-range power supply suitable for worldwide use
- EMI standards comply with FCC, CE class A
Specifications
| Hardware Specification |
| Ports |
24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports |
| Module Slots |
2 Gigabit TP/SFP combo ports |
| PoE ports |
12( port 1 to port 12) |
| Switch Processing Scheme |
Store-and-forward |
| Throughput (packet per second) |
6.547Mpps |
| Switch fabric |
8.8Gbps |
| Address Table |
8K entries |
| Share data Buffer |
512K Bytes |
| Flow Control |
Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
| Dimensions (W x D x H) |
440 x 265 x 44 mm, 1U height |
| Weight |
3.51kg |
| Power Requirement |
100~240V AC, 50-60 Hz |
| Switch Power Consumption / Dissipation |
13.5 Watts maximum / 46 BTU/hr maximum |
| PoE Power Consumption / Dissipation |
130 Watts maximum / 443 BTU/hr maximum |
| Temperature |
Operating: 0~50 degree C, Storage -40~70 degree C |
| Humidity Operating |
10% to 90%, Storage: 5% to 95% (Non-condensing) |
| Smart function |
| System Configuration |
Web interface |
| Port Status |
Display per port’s disable/enable status, per port’s link status and speed duplex mode. Also the Flow control status |
| Port Configuration |
Per
port disable/enable, Auto-negotiation disable/enable. 10/100Mbps full
and half duplex mode selection. Flow control disable/enable and
bandwidth control on each port |
| Trunk Configuration |
Supports 7 groups of 8-Port trunk |
| VLAN Configuration |
Maximum up to 26 VLAN groups for port-based VLAN |
| Port Monitoring |
One Mirroring port to monitor one mirrored port. The monitor modes are RX, TX and RX & TX |
| QoS Configuration |
IEEE 802.1p QoS on each port |
| Port counters |
Display detail traffic counters on each port |
| Access Control List |
Supports up to 16 Access Control list group |
| PoE Ports configuration |
Per PoE port disable / enable and power feeding priority assign |
| PoE Ports Status |
Per PoE port status such as Enable or disable, power consumption and current. |
| Standards Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3ab(Gigabit Ethernet)
IEEE 802.3z(Gigabit Ethernet)
IEEE 802.3af Power over Ethernet
IEEE 802.3x (Full-duplex flow control)
IEEE 802.1p QoS |
Click here to return
FGSW-2612PVS
|
