|
PSU 700W EPS12V 2+1 REDUNDANT(7TR3) |
|
|
March 2011 |
Key Features
-
700W EPS12V power supply
-
Cooling: by forced air 3 x 40mm DC Ball Bearing Fan
-
On/Off rocker switch, a warning buzzer
-
Temperature Range: Operation 0C~50C
-
HOLD UP TIME: 16ms at maximum load & normal input voltage
-
EFFICIENCY: 68% TYPICAL. (NORMAL LINE)
-
POWER
GOOD SIGNAL: Should be asserted high to indicate that +5VDC and +3.3
VDC output are above the lower voltage thresholds. Compatible signal out
with 100ms to 500ms.
-
OVER POWER PROTECTION: The power supply shall shut down when output power exceeds 130 to 160 of full load.
-
OVER VOLTAGE POROTECTION: Standard on +5.0V, set at 6.25VDC +-0.75VDC
-
SHORT
CIRCUIT PROTECTION: A short circuit placed between the DC return and
the output shall cause no damage and the power supply shall shutdown.
-
EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22.2
-
AGENCY APPROVALS: UL 6950 , CSA C22.2 No. 60950, TUV (IEC60950)
-
REMOTE
ON/OFF CONTROL: When PS-ON is pulled to TLL Low, the DC output is to be
enabled. When PS-OFF is pulled to TTL high, the DC output is to be
disabled.
-
AGENCY APPROVALS: UL6950 , CSA C22.2 No.60950, TUV (IEC60950)
-
MEET IEC-1000-3-2 Class D (active PFC)
Specifications
| Product |
|
Power Supply |
| Model |
|
Redundant 700W |
| Description |
|
EPS 12V |
| |
|
| VOLTAGE |
+5V |
+12V |
+3.3V |
-12V |
-5V |
+5Vsb |
| MAX. LOAD |
55A |
48A |
30A |
0.8A |
0.3A |
2A |
| REGULATION |
+-5% |
+-5% |
+-0% |
+-0% |
+-5% |
+-5% |
| RIPPLE(mV) |
50 |
120 |
50 |
120 |
50 |
50 |
|
| |
| Package |
|
box |
Click here to return
|
