Menu Content/Inhalt
Home

UPS KINPRO AXL 2000AP Print
March 2011
KXL-L.jpg
Features
  • Extend backup time by adding ext. battery packs.
  • Boost/buck, on-line, battery status LED display.
  • Line interactive design.
  • Boost and buck AVR.
  • Hot swappable battery by users.
  • Fully digitized microprocessor controlled.
  • Smart RS-232 communication port.
  • Lightning and surge protection.
  • Short circuit and overload protection.
  • 50/60Hz frequency auto sensing.
  • Tel/modem internet spike protection.
  • Site wiring fault warning (110V only).
  • Smart power management with software.
  • Cold start (DC power on).
  • Advanced battery management (ABM).
  • Energy saving (UPS sleep mode).
Specifications
Model: KXL-1000AP, KXL-2000AP.
Capacity: 1000VA/600W, 2000VA/1200W.
Voltage: +/-25% at line input.
Frequency: 50 or 60Hz +/-10% (auto sensing).
Voltage (on battery): simulated sine wave at +/-5% of nominal.
Frequency (on battery): 50 or 60Hz +/-0.5%.
Voltage Regulation (AVR): AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 13% below input voltage if +9% to +25% of nominal.
Transfer: 2/4 milliseconds, including detection time.
Protection & filtering:
Spike protection: 320 joules, 2ms.
EMI/RFI filter: 10dB at 0.15MHz, 50 dB at 30MHz.
Overload protection: UPS automatic shutdown if overload exceeds 110% of nominal at 60 seconds and 130% at 3 seconds.
Unit input: circuit breaker for overload & Short circuit protection.
10Base-T port: network (UTP, RJ-45) compatible jacks.
Short circuit: UPS output cut off immediately or input fuse protection.
Net Weight kg (lbs): 19.8 (43.56 lb), 28.9 (63.58 lb).
Shipping Weight Kg (Ibs): 21 (46.2 lb), 31.4 (69.08 lb).
Dimension WxDxH (mm): 130 x 382 x 201 (5.1" x 15" x 7.9"), 169 x 438.5 x 215 (6.7" x 17.3" x 8.5").
Input inlet: IEC 320 power inlet.
Receptacles: NEMA 5-15R(115V) / IEC320 female appliance coupler(230V).
Dry contact: AC fail, battery low, shutdown signal.
RS-232 interface: bi-directional communication port.


Click here to return