|
M/BOARD X9DRT-HF C602 TWIN |
|
|
April 2011 |
Key Features
1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 256GB DDR3 1600MHz ECC Registered DIMM; 8x DIMM sockets
4. Expansion slots: 1 x24 left hand riser+ 1 x8 for SMCI storage AOC (support up to 3 add-on cards)
5. Intel® i350 Dual port GbE LAN
6. 5x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with Dedicated LAN
8. 3x USB 2.0 ports (2 rear, 1 Type-A)
Specifications
 |
| MBD-X9DRT-HF -O |
- X9DRT-HF (Standard Retail Pack)
|
| MBD-X9DRT-HF -B |
|
| |
 |
| Form Factor |
|
| Dimensions |
- 6.8" x 16.64" (17.2cm x 42.3cm)
|
| |
 |
| CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| |
 |
| Memory Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 64 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
 |
| Chipset |
|
| SATA |
- SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC with graphic controller)
|
| Super I/O |
|
| |
 |
| SATA |
- 5x SATA 2.0 ports (3Gbps)
- 2x SATA 3.0 ports (6Gbps)
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 3x USB 2.0 ports (2 rear + 1 Type-A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
 |
 |
| 2U Chassis |
|
| Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
|
| |
 |
| PCI-Express |
- 1 x24 left hand riser + 1 x8 slot for SMCI AOC
(Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)
|
| |
 |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
| |
 |
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
 |
| Voltage |
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend Static indicator LED
- UID/Remote UID
|
| Other Features |
|
|
Click here to return
SX8DTT-F
|