Menu Content/Inhalt
Home

PLANET AP Indoor Booster 2.4GHz Indoor Print
April 2011
The WBT-200 is a high performance bi-directional amplifier operating on the 2.4GHz frequency band. It can be installedWBT-200.jpg indoor to extend the effective radio range. Moreover, the increased signal strength reduces packet retransmisions which caused by reception errors, and helps to provide a stable wireless connection. The intallation of WBT-200 is quick and easy, no additional software or configuration needed. To accommodate different environmental requirements, the output power of WBT-200 is adjustable: 100mW (20dBm), 200mW (23dBm), and 500mW (27dBm). Compatible with both 802.11b and 802.11g standards, the WBT-200 can significantly eliminate the dead spots of your 2.4GHz indoor WLAN.

Key Features
• 2400~2500MHz ISM band, unlicensed operation
• Compatible with 802.11b and 802.11g equipments
• Adjustable output power: 100/200/500mW
• Increase both transmit and receive gain
• Maintain a stable wireless connection quality
• Extend the effective range of existing WLAN
• Plug-and-Play installation

Specification
Model WBT-200  
Product
Operating Frequency 2400~2500MHz
Transmitter Output Power 100/200/500mW (20/23/27dBm)
Transmitter Input Power 8~18dBm
Receiver Gain 10~13dBm
Frequency Response Flatness +/- 1dB over operating temperature
Rx Noise Figure 3.5dB typical
RF Input Connector Reversed SMA
Antenna Connector Reversed SMA
RF Cable SMA to SMA
Length: 75cm
DC Surge Protection Available
Dimension (W x D x H) 75 x 56 x 25mm
Operating Temperature 0-45 degree C
Relative Humidity 10-90%, non-condensing
Power Requirement 12V DC, 1.25A
STANDARDS COMPLIANCE
Electromagnetic Compatibility FCC































Click here to return
WBT-200